Studies of inspection algorithms and associated microprogrammable hardware implementations

This work is concerned with the design and development of real-time algorithms for industrial inspection applications. Rather than implement algorithms in dedicated hardware, microprogrammable machines were considered essential in order to maintain flexibility. After a survey of image pattern recognition where algorithms applicable to real-time use are cited, this thesis presents industrial inspection algorithms that locate and scrutinise actual manufactured products. These are fast and robust - a necessary requirement in industrial environments. The National Physical Laboratory have developed a Linear Array Processor (LAP) specifically designed for industrial recognition work. As with most array processors, the LAP has a greater performance than conventional processors, yet is strictly limited to parallel algorithms for optimum performance. It was therefore necessary to incorporate sequentialism into the design of a multiprocessor system. A microcoded bit-slice Sequential Image Processor (SIP) has been designed and built at RHBNC in conjunction with the NPL. This was primarily intended as a post-processor for the LAP based on the VMEbus but in fact has proved its usefulness as a stand-alone processor. This is described along with an assembler written for SIP which translates assembly language mnemonics to microcode. This work, which includes a review of current architectures, leads to the specification of a hybrid (SIMD/NIMD) architecture consisting of multiple autonomous sequential processors. This involves an analysis of various configurations and entails an investigation of the source of bottlenecks within each design. Such systems require a significant amount of interprocessor communication: methods for achieving this are discussed, some of which have only become practical with the decrease incost of electronic components. This eventually leads to a system for which algorithm execution speed increases approximately linearly with the number of processors. The algorithms described in earlier chapters are examined on the system and the practicalities of such a design are analysed in detail. Overall, this thesis has arrived at designs of programmable real-time inspection systems, and has obtained guidelines which will help with the implementation of future inspection systems.<p

Electronic bandstructure of in-plane ferroelectric van der Waals β′−In2Se3\beta '-In_{2}Se_{3}

Layered indium selenides ($In_{2}Se_{3}$) have recently been discovered to host robust out-of-plane and in-plane ferroelectricity in the $\alpha$ and $\beta$' phases, respectively. In this work, we utilise angle-resolved photoelectron spectroscopy to directly measure the electronic bandstructure of $\beta '-In_{2}Se_{3}$, and compare to hybrid density functional theory (DFT) calculations. In agreement with DFT, we find the band structure is highly two-dimensional, with negligible dispersion along the c-axis. Due to n-type doping we are able to observe the conduction band minima, and directly measure the minimum indirect (0.97 eV) and direct (1.46 eV) bandgaps. We find the Fermi surface in the conduction band is characterized by anisotropic electron pockets with sharp in-plane dispersion about the $\overline{M}$ points, yielding effective masses of 0.21 $m_{0}$ along $\overline{KM}$ and 0.33 $m_{0}$ along $\overline{\Gamma M}$. The measured band structure is well supported by hybrid density functional theory calculations. The highly two-dimensional (2D) bandstructure with moderate bandgap and small effective mass suggest that $\beta'-In_{2}Se_{3}$ is a potentially useful new van der Waals semiconductor. This together with its ferroelectricity makes it a viable material for high-mobility ferroelectric-photovoltaic devices, with applications in non-volatile memory switching and renewable energy technologies.Comment: 19 pages, 4 + 1 figures; typos corrected;added references; updated figures & discussion to reflect changes in mode

Measurement of proton, deuteron, triton, and α particle emission after nuclear muon capture on Al, Si, and Ti with the AlCap experiment

Heavy charged particles after nuclear muon capture are an important nuclear physics background to the muon-to-electron conversion experiments Mu2e and COMET, which will search for charged lepton flavor violation at an unprecedented level of sensitivity. The AlCap experiment measured the yield and energy spectra of protons, deuterons, tritons, and alpha particles emitted after the nuclear capture of muons stopped in Al, Si, and Ti in the low energy range relevant for the muon-to-electron conversion experiments. Individual charged particle types were identified in layered silicon detector packages and their initial energy distributions were unfolded from the observed energy spectra. Detailed information on yields and energy spectra for all observed nuclei are presented in the paper.Comment: 24 pages, 19 figure

Determining the Electronic Confinement of a Subsurface Metallic State

Dopant profiles in semiconductors are important for understanding nanoscale electronics. Highly conductive and extremely confined phosphorus doping profiles in silicon, known as Si:P δ-layers, are of particular interest for quantum computer applications, yet a quantitative measure of their electronic profile has been lacking. Using resonantly enhanced photoemission spectroscopy, we reveal the real-space breadth of the Si:P δ-layer occupied states and gain a rare view into the nature of the confined orbitals. We find that the occupied valley-split states of the δ-layer, the so-called 1Γ and 2Γ, are exceptionally confined with an electronic profile of a mere 0.40 to 0.52 nm at full width at half-maximum, a result that is in excellent agreement with density functional theory calculations. Furthermore, the bulk-like Si 3pz orbital from which the occupied states are derived is sufficiently confined to lose most of its pz-like character, explaining the strikingly large valley splitting observed for the 1Γ and 2Γ states

Anti-phospholipid human monoclonal antibodies inhibit CCR5-tropic HIV-1 and induce β-chemokines

Traditional antibody-mediated neutralization of HIV-1 infection is thought to result from the binding of antibodies to virions, thus preventing virus entry. However, antibodies that broadly neutralize HIV-1 are rare and are not induced by current vaccines. We report that four human anti-phospholipid monoclonal antibodies (mAbs) (PGN632, P1, IS4, and CL1) inhibit HIV-1 CCR5-tropic (R5) primary isolate infection of peripheral blood mononuclear cells (PBMCs) with 80% inhibitory concentrations of <0.02 to ∼10 µg/ml. Anti-phospholipid mAbs inhibited PBMC HIV-1 infection in vitro by mechanisms involving binding to monocytes and triggering the release of MIP-1α and MIP-1β. The release of these β-chemokines explains both the specificity for R5 HIV-1 and the activity of these mAbs in PBMC cultures containing both primary lymphocytes and monocytes

Basic science232. Certolizumab pegol prevents pro-inflammatory alterations in endothelial cell function

Background: Cardiovascular disease is a major comorbidity of rheumatoid arthritis (RA) and a leading cause of death. Chronic systemic inflammation involving tumour necrosis factor alpha (TNF) could contribute to endothelial activation and atherogenesis. A number of anti-TNF therapies are in current use for the treatment of RA, including certolizumab pegol (CZP), (Cimzia ®; UCB, Belgium). Anti-TNF therapy has been associated with reduced clinical cardiovascular disease risk and ameliorated vascular function in RA patients. However, the specific effects of TNF inhibitors on endothelial cell function are largely unknown. Our aim was to investigate the mechanisms underpinning CZP effects on TNF-activated human endothelial cells. Methods: Human aortic endothelial cells (HAoECs) were cultured in vitro and exposed to a) TNF alone, b) TNF plus CZP, or c) neither agent. Microarray analysis was used to examine the transcriptional profile of cells treated for 6 hrs and quantitative polymerase chain reaction (qPCR) analysed gene expression at 1, 3, 6 and 24 hrs. NF-κB localization and IκB degradation were investigated using immunocytochemistry, high content analysis and western blotting. Flow cytometry was conducted to detect microparticle release from HAoECs. Results: Transcriptional profiling revealed that while TNF alone had strong effects on endothelial gene expression, TNF and CZP in combination produced a global gene expression pattern similar to untreated control. The two most highly up-regulated genes in response to TNF treatment were adhesion molecules E-selectin and VCAM-1 (q 0.2 compared to control; p > 0.05 compared to TNF alone). The NF-κB pathway was confirmed as a downstream target of TNF-induced HAoEC activation, via nuclear translocation of NF-κB and degradation of IκB, effects which were abolished by treatment with CZP. In addition, flow cytometry detected an increased production of endothelial microparticles in TNF-activated HAoECs, which was prevented by treatment with CZP. Conclusions: We have found at a cellular level that a clinically available TNF inhibitor, CZP reduces the expression of adhesion molecule expression, and prevents TNF-induced activation of the NF-κB pathway. Furthermore, CZP prevents the production of microparticles by activated endothelial cells. This could be central to the prevention of inflammatory environments underlying these conditions and measurement of microparticles has potential as a novel prognostic marker for future cardiovascular events in this patient group. Disclosure statement: Y.A. received a research grant from UCB. I.B. received a research grant from UCB. S.H. received a research grant from UCB. All other authors have declared no conflicts of interes